When charged it should function like new again. It can be a bit hard to reach, so maybe place it softly as deep as you can and then use the screwdriver to connect it fully.Īnd that is it! Now you just need to screw the lit back on, put it back on the charging dock and let it charge fully. For the last part, you need to connect this to the robot vacuum.
Your new battery should also have the same connector attached to it. It should be connected to the robot with a 4 pin connector, you can pull this out with whatever force you need – as long as you don’t need the battery again if you do then be a bit careful. The battery pack is very easy to take out. Once the lit has come off you’ll see the battery pack. After you’ve done screwing the plastic lit should come off easily. You then turn the robot upside down and get a screwdriver that fits into the screws. You need to hold them for about 10 seconds, it’ll then turn off.
You’ll hear the front “button” says click when it’s pressed. You do this by holding down the large power button on the top and holding down the left front side of the robot. It’s very easy to change the battery of all Neato models, so you can do this yourself following this guide.
#Neato d4 how to#
How to maximize your Neato's battery life The guide on how to change the robot vacuums battery.Do I need a special battery for my Neato robot vacuum?.How long does the battery in Neato models last?.The guide on how to change the robot vacuums battery.
0 kommentar(er)
